Dot-x SERIES Uživatelský manuál

DOT-X SERIESHandheld AddressableRemote ControlsPublication No. 01121 Rev B160 FIRST STREET S.E.ST. PAUL, MN 55112-7894PHONE 651-633-1742FAX: 651-633-

If you have changed the unit number from the factory setting, the currentnumber will appear where the 01 is shown above. To change thenumber, key in

JumperLocationSECURITY CODEDOT-X Series HARC moduleJumper Pins disconnected Pins connectedlocation (Factory setting)J4 Security Active No SecurityJump

1211CUSTOM OPTIONSSETTING THE CLOCKTo set the clock, first it is necassary to enter the security code and unitnumber, refer to GETTING STARTED earlier

Dotronix Limited WarrantyDotronix warrants that for one (1) year from date original purchase, it will, at its option, repair, replace or refund the pu

Congratulations on your purchase of a new DOT-X Series with HARC(Handheld Addressable Remote Control) option.This manual has been prepared to act as a

Stand in front of the unit (monitor) and aim the remote at the InfraRed(IR) receiver located on the upper left corner of the unit. Press and holdthe

TO ACTIVATE MENUS AND CONTROLSThe following on screen display (OSD) will appear.THIS UNIT SELECTEDALL MENUS/CONTROLS ACTIVEpress PREV. CH TO DE-SELECT

REMOTE CONTROLThe following has been prepared to act as a guide in the operation of yourHARC REMOTE CONTROL equipped units (monitors). Please read th

OffOnPowerSwitchIR EnableSwitchAVAILABLE MENUSYour unit is menu operated. In other words, adjustments to the unit aremade via a list of choices whic

AVAILABLE MENUSSelection Menu0 (zero) Change security code and unit ID number. 87 Set or change clock. 119 Set or change purity guard time. 128 Dis

SECURITY CODECHANGING SECURITY CODE AND UNIT NUMBERThe security code and the unit number can be changed with the remotecontrol. First it is necessary